1. LC81020/LM81020 經濟型光膜/啞膜 厚度20um(15+5)
適用于紙類、合成紙標簽,不需要挺度的標簽。對操作要求略高,膜類標簽慎用。
LC81020/LM81020 Economy Glossy/Matte Tape Thickness 20um(15+5)
Good for paper labels and not critical on label stiffness. Not recommended for film type label.
2. LC82024/LM82024 通用型光膜/啞膜 厚度24um(19+5)
適用于大部分紙類和一般的膜類標簽。過于粗糙的紙、絲印或者墨層過厚,膜類字體過小(2mm以下)的、PE膜類標簽慎用。
LC82024/LM82024 General Purpose Glossy/Matte Tape Thickness 24um(19+5)
Good for most paper labels and general purpose film labels. Not recommended for rough surface paper, silk print, heavy ink coverage, very fine print (below 2mm), and PE film labels.
3. LC83026/LM83026 加粘光膜/啞膜 厚度26um(19+7)
適用于紙類、膜類、亮銀龍、鋁箔紙等字體細密或上墨較厚的標簽產品較為合適。
LC83026/LM83026 High Tack Glossy/Matte Tape Thickness 26um(19+7)
Good for paper, film, silver foil labels with fine prints or heavy ink coverage.
4. LC83030 絲印光膜 厚度30um(20+10)
適用于紙類、膜類、亮銀龍、鋁箔紙等字體細密或上墨較厚的標簽產品,對絲印產品較為合適。
LC83030 Silk Screen Glossy Tape Thickness 30um(20+10)
Good for paper, film, silver foil labels with fine prints or heavy ink coverage. Also good for silk print.
5. LS84030 高光高亮光膜 厚度30um(23+7)
適用于大部分高要求的紙類和膜類標簽。尤其是對透光度及亮度有要求的BOPP類標簽、PE類標簽。
LS84030 Super Clear Glossy Tape Thickness 30um(23+7)
Good for high-end paper and film labels, especially BOPP and PE labels that have requirements on light transmittance and brightness.
6. LM82028 絲印啞膜 厚度28um(19+9)
適用于紙類、膜類、亮銀龍、鋁箔紙等字體細密或上墨較厚的標簽產品,對絲印產品較為合適。
LM82028 Silk Screen Matte Tape Thickness 28um(19+9)
Good for paper, film, silver foil labels with fine prints or heavy ink coverge. Also good for silk print.
7. LM85035 加粘加厚型啞膜 厚度35um(25+10)
粘性更好,挺度更高。適用于紙類、膜類、亮銀龍、鋁箔紙等標簽產品。
LM85035 Heavy Gauge Matte Tape Thickness 35um(25+10)
Better adhesion and stronger stiffness. Good for paper, film, and silver foil labels.
8. LE95037 耐溫、無聲光膜 厚度37um(25+12)
無聲、輕解卷、挺度好、耐溫。適用于有耐溫性(150℃以下)要求的紙類、膜類標簽;需要覆膜后多層黏貼的標簽。
LE95037 High Temp Loe Noise Glossy Tape Thickness 37um(25+12)
Low noise, easy unwind, good stiffness. Temperature resistance no more than 150℃. Good for multi-layers label applications.
9. LT84028 普通熱轉印光膜 厚度28um(23+5)
普通,適用于一般的碳帶熱轉印打碼需求。要配合適的碳帶使用方能滿足效果。需要混合基或樹脂基碳帶。
LT84028 Thermal Transfer Thickness 28um(23+5)
Good for thermal transfer printing applications. Recommended ribbon: hybrid or resine based.
10. LT94033 耐溫、可打印光膜 厚度33um(23+10)
耐溫,適用于大多數的碳帶熱轉印打碼需求。要配合適碳帶使用方能滿足效果。最好是樹脂基碳帶。
LT94033 High Temp, Scratch Resistance, Reprint, Thermal Transfer Glossy Tape Thickness 33um(23+10)
Heavy duty thermal transfer printing applications. Recommended ribbon: resine based.
11. LC87040/LM87040 超厚光膜/啞膜 厚度40um(30+10)
特別加厚的產品。適用于挺度要求的紙類、膜類標簽。
LC87040/LM87040 Heavy Duty Glossy/Matte Tape Thickness 40um(30+10)
Super heavy duty applications to enhance overall thickness and stiffness of labels.
12. 特殊光膜其他品種 鐳射光膜(花版、專版)、抗UV光膜、觸感啞膜、星光啞膜等
Other Special Films Laser Engraved Glossy Film, UV Resistance Glossy Film, Soft Touch Matte Film, Flash Point Matte Film.
電話:0750-2825263
郵箱:fsmwq@kpqiyu.com.cn